Farenhyt Fire alarm IFP-100

IFP-100 is an intelligent analog/addressable fire control panel. The
basic IFP-100 system has a single SLC loop and four notification
appliance circuits that can be programmed for notification outputs or
auxiliary power. IFP-100 also has a built-in dual line digital fire
communicator, Form C trouble relay, and two programmable Form C
relays. The firmware has powerful features, such as detector
sensitivity, day/night thresholds, drift compensation and pre-trouble
maintenance alert.
IFP-100 supports a variety of other devices that can be added to the
system such as RA-100 remote annunciator, 5824 serial/parallel
printer interface module (for printing system reports), and 5496
intelligent power module, and Hochiki (SD) or Intelligent Device
Protocol (IDP) devices.
• Built-in support for up to127 Hochiki devices or 99 IDP detectors
and 99 IDP modules
• Uses standard wire—no shielded or twisted pair required
• Built-in digital communicator for remote reporting of system activity
and system programming using either SIA or CID formats.
• Central station reporting by point or by zone
• Jumpstart® auto-programming
• Supports Class B (Style 4) and Class A (Style 6 or Style 7)
configuration for SLC
• Distributed, intelligent power
• Built-in synchronization for AMSECO, Gentex®, Faraday, System
Sensor®, and Wheelock® appliances
• Sensor sensitivity settings and day/night sensitivity setting
• Automatic drift compensation
• Notification circuits configurable as 2 Class A (Style Z), 4 Class B
(Style Y), or auxiliary power for resettable, constant, or door holder
• Built-in annunciator with a backlit 80-character LCD display
• RS-485 bus provides communication to system accessories
• Built-in Form C trouble relay rated at 2.5 amps at 27.4 VDC
• Two built-in Form C programmable relays rated at 2.5 amps at 27.4
• SLC device locator can be used to locate a single or multiple
devices on a SLC loop
• System automatically performs detector sensitivity test
• 13 preset notification cadence patterns (including ANSI 3.41) and
four user programmable patterns
• Built-in RS-232 and USB interface for programming
• Upload or download programming, event history, or detector status
onsite or from a remote location using a PC and 5650/5651 Silent
Knight Software Suite (SKSS)
• Improvements in SKSS deliver five times faster upload/downloads
• Non volatile event history stores up to 1000 events
• 125 Software zones and 125 output groups

(FARENHYT) - انذار الحريق FIRE ALARM