NOTIFIER AMPS-24 Addressable P ...

NOTIFIER AMPS-24 Addressable Power Supply, 120 VAC (NFS-3030/NFS2-3030).

 NOTIFIER AMPS-24 Addressable Power Supply, 120 VAC (NFS-3030/NFS2-3030).

General

AMPS-24 Notifier is an addressable power supply and battery charger with up to three 24 VDC outputs. It operates in either FlashScan® or CLIP (Classic Loop Interface Protocol) mode with the NFS-3030/NFS2-3030 Fire Alarm Control Panel (FACP). It can also be used as the primary power supply for the NCA-2 Network Control Annunciator.

Features

  • Addressable by NFS-3030/NFS2-3030 FACP.

  • Selectable charging current charges 7 AH to 200 AH batteries.

  • Isolated Signaling Line Circuit (SLC) interface.

  • Trouble bus input for use with normally-open dry contacts or open-collector circuit.

  • USB Type B connector for programming installation parameters.

  • Brownout detection.

  • Battery/battery charger supervision.

  • Secondary Power Auxiliary Outputs: 24V @ 0.5A and 5V @ 0.15A.

  • AC loss detection and AC loss delay reporting.

  • Mounts in a CAB-4 Series enclosure, EQ Cabinet Series enclosure, BB-25, BB-100, or BB-200 Battery Backbox.

  • AUX 24V – provides filtered power-limited power for additional components. Refer to table above for configuration/ current information.

  • Secondary power (battery) charging circuit: Current-limited, sealed lead-acid battery charger which will charge 7 to 200 AH batteries. Selectable charging current: 1.0 A, 2.0 A or 5.0 A.

  • Secondary power auxiliary outputs.

  • Wire sizes: 10 AWG (5.26 mm²) to 22 AWG (0.326 mm²).

  • Battery fuse (F2): 15 A, fast-acting.

  • Shipping Weight: 4.25 lb


(NOTIFIER BY HONEYWELL) - Fire Alarm FIRE ALARM