specifications

• FlexCore™ Signal Processor
The FlexCore Signal Processor is an Application-Specific Integrated

Circuit (ASIC), which processes sound data in parallel rather than

sequentially for faster, more accurate detection decisions. The combination

of proven FlexGuard® performance with the speed of FlexCore processing

provides unmatched false alarm immunity without compromising detection.

• Easy Installation and Setup
Honeywell’s patented technology allows remote activation of Test Mode

(with simulator). The FG1625RFM recesses in a 1.0" (26mm) diameter hole

through a false ceiling or sheetrock. A hand-clap feature verifies that

the detector is functioning.

• Selectable Sensitivity
Two DIP switches on the FG1625RFM make it easy to set the sensitivity

to match the acoustics of the room. Four different sensitivity levels are

available, ranging from very low to high. The range can then be verified

remotely with the FlexGuard FG701 Glassbreak Simulator.

• Mount the Detector Anywhere
Flush mounts in any wall, or in the ceiling, with no minimum range

and a maximum range of 25' (7.6 m) to the glass.

• Covers All Glass Types
The FG1625RFM works on all glass types, including plate, tempered,

laminated, wired, filmcoated, and sealed insulating glass.

• Multiple Domain Signal Analysis
The FG1625RFM performs Multiple Domain Signal Analysis in which

time, frequency and amplitude characteristics are evaluated for signal

qualification. This enables the detector to accurately discriminate

false alarms from true glassbreak events.

• Patented Remote Test Mode
The Patented Remote Test Mode can enable or disable the indicator

LEDs using the FG701 Glassbreak Simulator. The unit automatically

resets from Test Mode in five minutes.

• Mounting Locations
The FG1625RFM can be flush mounted in the ceiling, opposite wall,

adjoining wall, or the same wall as the glass through a 1" diameter hole.

Zoom

Zoom