NOTIFIER FIRE ALARM Transponde ...

NOTIFIER FIRE ALARM Transponder Control Module XP6-C

XP6-C NOTIFIER, SIX CIRCUIT SUPERVISED CONTROL MODULE.
XP6-C Notifier six-circuit supervised control module provides intelligent alarm systems with supervised monitoring of wiring to load devices that require an external power supply to operate, such as horns, strobes, or bells. Each module is intended for switching applications involving AC DC or audio, which require wiring supervision. Upon command from the control panel, the XP6-C will disconnect the supervision and connect the external power supply across the load device.

Six addressable Style B (Class B) or three addressable Style D (Class A) outputs that function as notification appliance/speaker/telephone circuits.
Removable 12 AWG (3.31 mm²) to 18 AWG (0.821 mm²) plug-in terminal blocks.
Status indicators for each point.
Unused addresses may be disabled (up to 3).
Rotary address switches.
FlashScan® or CLIP operation.
Optional SYNC-1 accessory card for SpectrAlert and SpectrAlert Advance devices.
Mount one or two modules in a BB-XP cabinet (optional).
Mount up to six modules on a CHS-6 chassis in a CAB-3 Series, CAB-4 Series, EQ Series, or BB-25 cabinet (optional).
Mounting hardware included.
Each XP6-C module features a short-circuit-protection monitor to protect the external power supply against short-circuit conditions on the NAC. When an alarm condition occurs, the relay which connects the external supply to the NAC will not be allowed to close if a short-circuit condition currently exists on the NAC. Additionally, an algorithm is incorporated to find shorts when the module is active. The XP6-C module will close all circuits that are not shorted to find the NAC with the problem.


(NOTIFIER BY HONEYWELL) - Fire Alarm FIRE ALARM