NOTIFIER FIRE ALARM Transponde ...

NOTIFIER FIRE ALARM Transponder Relay Module XP6-R

XP6R NOTIFIER, RELAY CONTROL MODULE.
XP6R Notifier six-relay control module provides an intelligent fire alarm system with six Form-C relays.

The first module is addressed from 01 to 154 while the remaining modules are automatically assigned to the next five higher addresses. Provisions are included for disabling a maximum of three unused modules. A single isolated set of dry relay contacts is provided for each module address, which is capable of being wired for either a normally-open or normally-closed operation. The module allows the control panel to switch these contacts on command. No supervision is provided for the controlled circuit.

Six addressable Form-C relay contacts
Removable 12 AWG (3.25 mm²) to 18 AWG (0.9 mm²) plug-in terminal blocks
Status indicators for each point
Unused addresses may be disabled
Rotary address switches
FlashScan® or CLIP operation
Mount one or two modules in a BB-XP cabinet (optional)
Mount up to six modules on a CHS-6 chassis in a CAB-3 Series, CAB-4 Series, EQ Series, or BB-25 cabinet (optional)
Mounting hardware included
Each XP6-R module has panel-controlled green LED indicators. The panel can cause the LEDs to blink, latch on, or latch off.

Standby current: 1.45 mA (SLC current draw with all addresses used; if some addresses are disabled, the standby current decreases)


(NOTIFIER BY HONEYWELL) - Fire Alarm FIRE ALARM